Avoid Heat Stress in Cattle with Proper Planning
AMES, Iowa – With continuing weather forecasts of temperatures in the mid- to upper 90s and heat index topping 100 degrees in Iowa, Iowa State University Extension and Outreach beef veterinarian Grant Dewell reminds beef cattle producers that properly preparing for these weather conditions is vital to maintaining herd health.
Five steps to avoiding heat stress in your herd
- Plan ahead. After cattle get hot, it’s too late to prevent problems.
- Don’t work cattle when it is hot. Finish working cattle before 9 to 10 a.m. in summer, and remember that during a heat wave it’s best to not work cattle at all.
- Provide plenty of fresh clean water. When it’s hot and humid, consuming water is the only way cattle can cool down. Make sure the water flow is sufficient to keep tanks full, and ensure there’s enough space at water tanks (3 inches linear space per head.) Introduce new water tanks before heat event occurs so cattle know where they are.
- Feed 70 percent of ration in the afternoon. Heat from fermentation in the rumen is primary source of heat for cattle. When cattle are fed in morning peak rumen temperature production occurs during the heat of day when they can’t get rid of it. By feeding 70 percent of ration in late afternoon, rumen heat production occurs when it is cooler.
- Provide ventilation, shade and/or sprinklers. Environmental temperatures compound the heat load for cattle during a heat wave. Remove objects that are obstructing natural air movement. Indoor cattle will benefit from shade provided by the building as long as ventilation is good. Outdoor cattle will benefit from sprinklers to cool them off. Make sure cattle are used to sprinklers before employing them during a heat wave.
Check out these additional resources:
Heat Stress in Beef Cattle article by Dewell
Iowa Beef Center heat-related resources
Iowa Beef Center drought-related resources
USDA ARS 7-day heat stress forecast