Adding a Printer to the Office Network

In order to configure your new printer for the Extension network please follow these steps:

  1. Contact Scott Saunders in advance to schedule a time for him to configure the printer.
  2. After receiving the printer, follow the included instructions to physically set it up, connect power and network cables, install toner, etc.
  3. Print a network configuration sheet using the included instructions.
  4. Contact the EIT Hotline (515-294-1725) at the scheduled time with configuration sheet in hand.
Using information on the printed config sheet IT staff will remotely configure your printer for the Extension network. After confirming these settings IT staff can assist you with driver installation on one or more computers, or you may contact the Extension IT Support Hotline as needed.