Skip Navigation

Farmers Reminded to Wait Until Soil Temps are 50 Degrees and Falling Before Applying Anhydrous Ammonia Fertilizer

Farmers are encouraged to wait until soil temperatures remain below 50 degrees Fahrenheit before applying anhydrous ammonia (NH3) fertilizer this fall. With the record early harvest this year, officials with the Iowa Department of Agriculture and Land Stewardship and Iowa State University (ISU) Extension and Outreach said that waiting can help reduce nitrogen loss and better protects the environment.
 
“With farmers finishing harvest earlier than normal, it is important that they still wait for cooler soil temps to apply anhydrous so that there is a better chance the fertilizer stays put and will be available to the crop next spring,” said Bill Northey, Iowa Secretary of Agriculture.  “Soil temperatures, like air temperatures, can change quickly so it is important that we wait with applications until soils are likely to remain below 50 degrees.”

“Historically, soil temperatures at a 4-inch depth cool below 50 degrees in the northern third of the state during the first week of November,” said Elwynn Taylor, ISU Extension and Outreach climatologist. “In central and southern Iowa, soil temperatures cool below 50 degrees during the second and third weeks of November.”
 
ISU Extension and Outreach maintains a statewide real-time soil temperature data map on their website that ag retailers and farmers use to determine when fall N applications are appropriate. The website can be found at http://extension.agron.iastate.edu/NPKnowledge/.
 
Farmers should also be mindful to pay special attention when applying anhydrous ammonia to very dry soil. Dry soil can hold ammonia, but if they are cloddy and do not seal properly, the ammonia can be lost at injection or seep through the large pores between clods after application.
 
So farmers and applicators should assure proper depth of injection and good soil coverage when applying into dry soils. If, following a round of application in the field, the ammonia can still be smelled, the applicator should make adjustments or wait for better conditions.

 


This article was published originally on 10/17/2012 The information contained within the article may or may not be up to date depending on when you are accessing the information.


Links to this material are strongly encouraged. This article may be republished without further permission if it is published as written and includes credit to the author, Integrated Crop Management News and Iowa State University Extension. Prior permission from the author is required if this article is republished in any other manner.