By Mark Hanna, Department Agricultural and Biosystems Engineering ; and Mahdi Al-Kaisi, Department of Agronomy
Last fall wet soil conditions during harvest time created unavoidable soil destruction and significant soil scars or ruts. Most likely significant soil compaction took place as the ruts were made. The wheel ruts remaining from harvest and general irregularities after primary fall tillage often lead growers to consider spring tillage to level the soil for subsequent planting operations.
Although many fields have a chance to drain between rainfall events, soil below a couple of inches of the surface still remains at field capacity moisture content and may be too wet and plastic to respond well to tillage. Soil at field capacity water content is in ideal condition for maximum soil compaction. Therefore if you are planning to work these soil ruts out, check your soil moisture condition before conducting any tillage operation and avoid worsening the problem by increasing soil compaction.
If you determine the soil is dry enough to work, closely check the rut conditions and how deep these cuts are in the soil surface to decide proper management.
• Unless surface irregularities are deeper than planting depth (e.g., 1.5 to 2 inches), tillage is likely not needed ahead of the planter to maintain seed depth.
• If deeper surface irregularities are present, consider shallow tillage with a field cultivator or light tandem disk in those areas to level soil for planter operation.
• Tilling soil only surface soil avoids pushing, smearing, and compacting wetter soil below the surface.
For further information on handling ruts left from fall harvest see Soil Management of Harvest Ruts.
Mark Hanna is an extension agricultural engineer in agricultural and biosystems engineering with responsibilities in field machinery. Hanna can be reached at firstname.lastname@example.org or (515) 294-0468. Mahdi Al-Kaisi is an associate professor in agronomy with research and extension responsibilities in soil management and environmental soil science. He can be reached at email@example.com or (515) 294-8304.
This article was published originally on 4/7/2010 The information contained within the article may or may not be up to date depending on when you are accessing the information.
Links to this material are strongly encouraged. This article may be republished without further permission if it is published as written and includes credit to the author, Integrated Crop Management News and Iowa State University Extension. Prior permission from the author is required if this article is republished in any other manner.